Renewable energy sources are undergoing intense study these days. According to Renewables 2015 Global Status Report, “by 2013, the most year for which data are available, renewable energy provided an estimated 19.1% of global final energy consumption.” This trend is constantly increasing every year. The most common renewable energy sources are photovoltaic panels, fuel cells, and speed wind turbines. To increase the efficiency and reliability of the supplied power, all of the sources might be interconnected to supply power to the single load. Moreover, the sources might be distributed. This, in turn, raises necessity in communication channels between the power generators to increase the efficiency of the overall system.
Figure 1 shows a simple example of interconnection of many DC/AC inverters. This kind of interconnection is typical in distributed power generation with photovoltaic panels. The panels generate DC voltage, and it must be converted to AC. All of the inverters are hooked to a single load to increase overall power. However, a significant amount of efficiency loss is introduced if generated AC voltages by each of the inverters are off-phase.
Figure 1 – interconnection of many DC/AC inverters
This project addresses an issue of unsynchronized power generators and proposes a solution. The interconnection was modeled as a cyber-physical system and was described by the difference and differential equations. The correctness of the proposed solution is based on the MATLAB simulation of the model. The simulation results are available in Results section.